Forums FUG-FR
https://forums.fug-fr.org/cgi-bin/yabb2/YaBB.pl
FreeBSD >> Logiciels tiers >> problème kde
https://forums.fug-fr.org/cgi-bin/yabb2/YaBB.pl?num=1210013818

Message started by calimero on 05. May 2008 at 20:56

Title: problème kde
Post by calimero on 05. May 2008 at 20:56

Bonjour,
Quand je tape la commade startx kde il m'afiiche une erreur

[code]Waiting for x server to shut freefrontpath fpe /usr/local/lib/x11fonts/misc/ refcount is 2, shhould be 1; fixing

xauth: error in locking authority file /root/.xauthority [/code]

;)

Title: Re: problème kde
Post by Olivier on 05. May 2008 at 21:38
Bonjour,

Il faudrait que tu saisisses dans ton fichier .xinitrc:

Code (]exec startkde[/code):
Ensuite, tu peux lancer la commande:
[code]startx

+  :)

Title: Re: problème kde
Post by calimero on 05. May 2008 at 22:30

j'ai eu réussi avoir l'interface, normal j'ai un font gris avec deux fenêtre
login et le xterm quand je tape kedit il m'a iffiche une erreur


Code (]The was an error setting  upcess communication for kde the message returned by the system was:

coult no open netwok socket


please check that the dcopserver program is running  [/code):

[code]Will not save configure

configure file /root/kde/share/config/kdeglobals not writable
Please contact you system administrateur


J'e n'arrive sauvegarder modification dans  le rc.conf

Title: Re: problème kde
Post by calimero on 06. May 2008 at 09:31
quand je tape la commande suivante startx kde il m'affiche l'erreur suivante

[code]waiting for x server to shut down freefontpath: fpe /usr/local/lib/x11fonts/misc/ " refcount is 2, should be 1; fixing

xauth 'argv) :1 bad display name "darken:0" in"remove" commande [/code]

Title: Re: problème kde
Post by Olivier on 06. May 2008 at 11:42
Je ne t'ai pas dit de taper startx kde mais de créer/éditer le fichier caché .xinitrc se situant dans ton home puis lui ajouter la ligne suivante:

Code (]exec startkde[/code):
tu le sauvegardes et ensuite en console, tu tapes:
[code]startx

+  :)

Title: Re: problème kde
Post by calimero on 06. May 2008 at 13:12
Bonjour

je n'avais vu ton message Olivier, quand j'exécute la commande pour lancer le kde maintenant  il m'affiche une  un font noir juste après il m'affiche plusieurs fenêtre avec un message  d'erreur la première fenêtre  il m'affiche se message


Code (]Could not start kstartupconfig. Check your installation[/code):
deuxième  fenêtre qui apparait quelque secondes après la première

[code]The was an error setting up inter-process communications for kde. The message returmed by the system was: Could no open network socket
Please check thet the "dcopserver" program is running




troisième fenêtre

[code]Will not save configuration
Configuration file"/rootkde/conf/kbuildsycocarc" not writable
Configuration file"/root/kde/share/config/kde/globals" notwritable[/code]




Forums FUG-FR » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2025. All Rights Reserved.